Friday, March 7, 2014

DIY Tablet pouch

I saw these super cute tablet pouches that you can put your tablet or phone in and hook onto the back of the driver's seat so the kids can watch a movie or clip on a grocery cart so it doesn't go smashing into the ground when your kids throw it out.  They were adorable but at the same time too expensive for me to buy one and I had the thought, "I can make that for a whole lot cheaper."  And I did. I was able to use fabric and ribbon scraps and I only spent 50 cents to buy the plastic cover part!


I know you want one now too, so here is a little tutorial.  I was able to make 4 of these in just over 2 hours.  It may have been quicker if my little ones were not helping me :)

Materials:
Fabric - 2 rectangles sized 11 in x 7.5 in (tablet size) or 9 in x 6.5 (phone size)
Clear Vinyl - 10 in x 7.5 (tablet size) or 8 in x 6.5 in (phone size)  (I bought a 1/2 yard for 50 cents.) 
Velcro - 4 in (tablet size) or 3 in (phone size)
Ribbon - 2 pieces 4 in each
Toy rings or some other type of hook

1. I sewed one side of the Velcro onto the clear vinyl.  I would suggest sewing on the soft side of the Velcro and changing the settings on your sewing machine to a bigger stitch and a looser tension (I broke a needle before realizing I should do this).

2. Sew a hem on one short edge of each of your fabric (be sure to change your setting back to normal).

3. Now you are going to layer each of your pieces to pin and get ready to sew together. On the bottom lay a piece of fabric face up. Next lay down your clear vinyl face up with the velcro part about an inch away from the top of the hem on the bottom lay (see picture).  Then you will pin the ribbon in place with the loops facing in (NOT sticking out).  On top you will put your second piece of fabric face down with the hem lined up with the bottom layer.  Now pin all the edges together.

4. Sew along the two long sides and the bottom.  DO NOT sew the hem edge!

5. Turn your project right side out! Looking good!

6. On the hem edge you can either sew it closed by sewing lining up the hems and sewing over them  or you can leave it open and make another pocket here.

7. For the last piece of velcro you can either sew it on or be like me and hot glue it on.  If you made a pocket on the hemmed opening you can put another piece of velcro here too as a closure for that pocket.

8. Slide the toy hooks on and you have a super handy adorable tablet pouch!

If you make one, I would love for you to add a link to a picture of it in the comments!

Lastly, this is a free project so if you copy this tutorial to your blog or website please link back to my blog. Thank you!

No comments:

Post a Comment